Close
Close
Close
For Motorcycle

SUPPORT

SUPPORT

【SUZUKI ADDRESS V50】


Here is an explanation of how to fix a coiled wire to a small scooter. (SUZUKI ADDRESS V50).

Small scooters might not have a suitable frame to fix a coiled wire.
Don’t fix the coiled wire to places where sufficient strength cannot be provided, such as low-strength metal or plastic parts.
Please ensure that a place to fix a coiled wire has sufficient strength and the wire doesn’t move around or slide after being fixed.

Depending on the installation position of the coiled wire, it may get caught in a groove or a gap between existing parts.
In this case, please use “protector tube” as an optional accessory.


Coiled wire attachment example with SUZUKI ADDRESS V50

Coiled wire attachment example with SUZUKI ADDRESS V50


Let the wire wind a motorcycle frame and fix firmly by a loop setter.
After tying a knot on the extra part of the coiled wire, cut the extra length after leaving at least 2cm away from the knot. Put a cap on the end.


Let the wire wind a motorcycle frame.

Bundle the wires by a loop setter.

Turn the wing screw tightly

Put an end cap.

Finish.


The coiled wire attachment is finished as above procedures.
The proper length of the coiled wire is determined when the wire is fully extended while standing on steps of the motorcycle.
Improper length of the coiled wire can cause delays or malfunctions in airbag operation.